|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-10-2007, 05:35 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Brisbane
Posts: 1,770
|
hey guys.. i got a series 1 AU futura... and i'm triying to pull out the centre surround.. where all the air con controls are.. and the stereo etc....
i wanna get in there coz my fan control lights aren't working.. so lookign to investigate... Thanks Trent |
||
|
|
|
28-10-2007, 06:10 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
remove stereo (then cage and pocket if not factory unit), theres (I think) 2 screws on either side in where the stereo lives. after that it just pops out. If in any spots it feels a bit tight, you've missed a srew. Oh theres also a couple of screws behind the ashtray
|
||
|
|
|
|
28-10-2007, 07:44 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Brisbane
Posts: 1,770
|
yeah i got the screws behind the ashtray... it comes loose at the bottom.. but was tight aruond the middle.. which i guess is the screws behind the head unit...
another question?.. how do you remove the head unit? is it the 4 little holes on the front face?.. i'll have another look shortly... thanks for the info .. 
|
||
|
|
|
|
28-10-2007, 09:18 PM
|
#4 | ||
|
Wanting a sprint!
Join Date: Jul 2007
Location: In Between The Lines!
Posts: 925
|
there are 2 screws 0nce the radio is removed , do a search for how to remove the radio itll be there man thats how i learnt.
__________________
On track for mint turbo falcon |
||
|
|
|
|
28-10-2007, 11:20 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Brisbane
Posts: 1,770
|
thanks... i'll have a look into it..
muchly appreciate the help as always..
|
||
|
|
|
|
29-10-2007, 08:08 AM
|
#6 | ||
|
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Yep the 4 holes. The manual says to use a special tool from Ford or make one from a wire coat hanger. I wrecked a faceplate trying the coathanger. Asked the Ford dealer for the tool, they'd never heard of it & sent me to a car audio specialist. They'd never seen a special tool either, they use 1/8" or 3mm drill bits in the holes...
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
|
|
|
How do you remove the centre surround?
Linear Mode
