|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-12-2010, 07:13 PM
|
#1 | ||
|
Previously TUNGA
Join Date: May 2007
Location: Ferntree gully vic
Posts: 63
|
I am having trouble with the electric windows in my xr8 ute . They are slowing down and squeaking . I have spayed heaps of silicon on the rubbers and it has not helped much .If i grab hold of the windows i can move them sideways In my sons xr6 ute they do not move as much as mine and his work fine .
do i need new regulators or is there an adjustment to fix this problem . regards Damo |
||
|
|
|
01-12-2010, 07:48 PM
|
#2 | ||
|
Giddy up.
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,683
|
Have a look here mate,
http://www.fordforums.com.au/showthr...828#post263828 |
||
|
|
|
01-12-2010, 07:52 PM
|
#3 | |||
|
pursuit ute baby
Join Date: Jun 2010
Posts: 864
|
your bailey runners might be beyond 'silicon spray'.. i hope you used silicon spray, not silicon glue !
 mine were running quite average (both windows) so i bought a new motor for the drivers and silicone sprayed both runners.. the passenger is now only JUST slower than the drivers with the new motor... if i hadnt have thrown out the old motor, i would have given it to you for nothing to do some problem shooting... try taking all your trim off, its possible the glass has jumped the runner slightly, or there could be something inside your doorskin obstructing things. quite an easy job to do, just take your time so you dont damage anything. Quote:
__________________
my ride : AU xr8 pursuit ute
|
|||
|
|
|
|
01-12-2010, 07:53 PM
|
#4 | ||
|
Giddy up.
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,683
|
And this one about the graphite powder, might help.
http://www.fordforums.com.au/vbporta...window+problem |
||
|
|
|
|
02-12-2010, 07:49 AM
|
#5 | ||
|
Previously TUNGA
Join Date: May 2007
Location: Ferntree gully vic
Posts: 63
|
Thanks for your help. I will give it a go on the weekend if it is not too wet.
|
||
|
|
|
|
06-12-2010, 08:00 PM
|
#6 | ||
|
Previously TUNGA
Join Date: May 2007
Location: Ferntree gully vic
Posts: 63
|
Problem solved bought some window lube from Ford . Expensive at $78.00 a bottle but a lot cheaper than a electric window motor
|
||
|
|
|
|
06-12-2010, 08:22 PM
|
#7 | ||
|
Giddy up.
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,683
|
Good to hear mate.
|
||
|
|
|
|
06-12-2010, 10:38 PM
|
#8 | |||
|
pursuit ute baby
Join Date: Jun 2010
Posts: 864
|
Quote:
actually theres brand newies on ebay for around that.. dont buy anything from fraud if you can help it mate...
__________________
my ride : AU xr8 pursuit ute
|
|||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
XR8 ute electric window problem
Linear Mode
