|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-11-2007, 10:46 PM
|
#1 | ||
|
XA&XB&XC
Join Date: Sep 2005
Location: Vic
Posts: 103
|
Hi All,
I'm in Morwell, Country Vic and had an Accelerator cable jam up. Any help on where to find one? before Monday...It's a 1985 Telstar thanks Greg |
||
|
|
|
17-11-2007, 11:59 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
you take off the cable and hang it on the cloths line and feed it with oil or wd 40 inside the outer cover then try to get it moving backwards and forwards
if the strands are broken inside you can try to cut the most annoying ones do you have a push bike handbrake cable ? if you have to improvise depends where the break is I can only suggest twist/ patch in the right length or fencing wire or wire coat hanger if the outer cover is the problem a PVC hose or off a fish tank or something a similar thickness even tape will do and if still a problem a return spring at the carby
__________________
My car goes Brumm Brumm Last edited by dirty hands; 18-11-2007 at 12:04 AM. |
||
|
|
|
85 Telstar Accelerator Cable URGENT!!
Linear Mode
