Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 02-02-2018, 12:19 PM   #1
lukejnsn
Starter Motor
 
Join Date: Jul 2017
Posts: 3
Default Engine help please

Hi, got a standard 2l four door 1980 escort ghia. I am having trouble between 2500 to 3000 revs. Fine before then when it hits there starts to feel like it's missing then if I drop back a gear and punch through its fine again. Does this under load and no load. Standard Webber carb, cam is as well as far as I know. Any ideas. Dizzy looks OK but to be on the safe side have ordered new rotor, points etc. any help appreciated.
lukejnsn is offline   Reply With Quote Multi-Quote with this Post
Old 02-02-2018, 12:33 PM   #2
Puzzlescort
Rally Nut
 
Puzzlescort's Avatar
 
Join Date: Feb 2009
Location: Melbourne
Posts: 297
Default Re: Engine help please

I'd check the vacuum advance on the dizzy as one of the things
Puzzlescort is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 04-02-2018, 06:12 PM   #3
XP6
Formerly ST170ish
 
XP6's Avatar
 
Join Date: Jan 2005
Location: Down south
Posts: 1,673
Default Re: Engine help please

I had one that did the same thing but wouldnt rev past 3500rpm, after about 4 mechanics I took it too an old school(RIP Harry)fella within about 5 minutes he diagnosed the dissy shaft had to much side ways play causing the points dwell angle to jump all over the place.
New dissy fixed it, so find some who has a dwell meter and see If the needle swings about wildly.
__________________
My bad attitude escalates in direct proportion to the amount of stupidity I am presented with!!!
XP6 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 04-02-2018, 06:31 PM   #4
foxtrot3
FF.Com.Au Hardcore
 
foxtrot3's Avatar
 
Join Date: Apr 2008
Posts: 5,481
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical articles. 
Default Re: Engine help please

Hi. Other things to check in the dissy are the wire from the points to the coil and the earth wire on the breaker plate. Cheers MD
__________________


HI

I'M MICHAEL

2003 ACID RUSH BA FUTURA WAGON

light up window switches | auto on cruise control | doubleclick window lift from remote
foxtrot3 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 09:11 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL