|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
05-05-2013, 04:26 PM | #1 | ||
Starter Motor
Join Date: May 2012
Posts: 27
|
Hey guys, i have recently bought a 2009 fiesta and I absolutely love it. 3 door in black as well!
I was wondering: a) What modifications can I get done to it b) where do I get them done! Thanks guys! |
||
05-05-2013, 06:04 PM | #2 | ||
Regular Member
Join Date: Mar 2011
Posts: 204
|
Best advice I can give you - Apart from (may be) a nice set of wheels, don't do it!!
Mods are like tattoos. You'd be more unique if you didn't have any. Not to mention you'll have more $$$ left over for better things. |
||
05-05-2013, 09:35 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
Id agree, don't bother.
As soon as you put some 19's on you will need to lower it, then it will look tough so a 2-2.25 inch exhaust with shiny dump will be needed to make it sound like it looks, then of course a multi speaker upgrade and amps to drown out the exhaust, of course a new head unit will now be required as the old one doesn't cut the mustard and not keeping up with the amps and speakers. then the car will look and sound tough but go like a 2009 fiesta over-weighed with accessories so a turbo conversion will be needed. Of course now you at light speed you need to stop so a full set of AP racing 350mm disks and 6 pot calipers up front and 4 's on the rear is necessary. So it goes and stops but it's not a falcon so it needs to turn the corners so bust out the cash for some custom prolines, bars, angles and best upgrade the tyres to semi slicks to take advantage of it all. Now its like a one off 2009 Fiesta but the interior and exterior are letting you down. How about a WRC body kit 2 door conversion and Matte green paint and splurge on a set of the best recaro seats and have the rears trimmed to suit, best have the speaker cones match painted too, trim out the door cards in soft weave carbon and finally don't forget the fluffy dice... Pick and choose or leave it alone. JP |
||
This user likes this post: |
06-05-2013, 10:02 AM | #4 | ||
Starter Motor
Join Date: May 2012
Posts: 27
|
cheers guys, I wasnt going to go over the top with modifications just something nice and simple! I love the thing just wanted to know what was out there as I have no idea about any of it!
Its got a nice set of 17's on it from an original owner but still just a nice exhaust note would be great and thats about it! |
||
06-05-2013, 10:49 AM | #5 | ||
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
To make it yours...at least lower it so the arches fit the wheels and any exhaust shop can do a Cat back exhaust making it sound Ok
JP |
||
06-05-2013, 11:50 AM | #6 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,547
|
|
||
03-06-2013, 12:15 PM | #7 | ||
Regular Member
Join Date: Apr 2013
Posts: 56
|
thats a bit harsh guys....
here is something different http://www.pumaspeed.co.uk/product-F..._916.jsp&pic=1
__________________
Currently have; 2010 Subaru Forester XT Lux with 210awkw 2011 Ford Fiesta WT LX hatch (diesel) Use to have; 2005 Mazda 3 SP23 highly modified with 130fwkw 2000 Nissan Pulsar LX 1988 Toyota Celica GT coupe |
||
03-06-2013, 01:00 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
Whats harsh about our comments and advice?
JP |
||
06-06-2013, 11:27 AM | #9 | ||
Regular Member
Join Date: Apr 2013
Posts: 56
|
if the guy wants to mod let him go and point him in the right direction ... no need to be all sarcastic and shut him down...so he comes back on the defensive... anyhoo have fun and mod the car as you feel fit.
__________________
Currently have; 2010 Subaru Forester XT Lux with 210awkw 2011 Ford Fiesta WT LX hatch (diesel) Use to have; 2005 Mazda 3 SP23 highly modified with 130fwkw 2000 Nissan Pulsar LX 1988 Toyota Celica GT coupe |
||
13-06-2013, 05:17 PM | #10 | ||
Audiophile
Join Date: Feb 2010
Posts: 359
|
Take the intake snorkel off, gives it a little bit more of a growl under acceleration without making it drone on the highway.Oh and install a 12inch subwoofa!!!
__________________
WS Fiesta in Moondust Silver ~ G2 17's (205/40/17), 1700W Sony stereo, SOLD ZOOM ZOOM: 2009 Mazda 3 MPS (2nd gen) 256bhp through the front wheels... hello torque steer!!! |
||
This user likes this post: |
14-06-2013, 11:04 AM | #11 | ||
Starter Motor
Join Date: May 2012
Posts: 27
|
thanks guys. I can understand were your all coming from. just wondering what is out there because its going to be a first for me. Never done it before. Was going to do it with my falcon but some dumb %*&k wrote it off.
|
||
14-06-2013, 11:33 AM | #12 | ||
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
While my response may have been a bit tongue in cheek it does identify what and how far you could actually go depending on how deep your pockets are.
But Id advise firstly it is a waste of money unless you get great joy from it and intend on keeping the car for a while, secondly start with a budget, based on what your plan might be, then double it, and finally have a plan. Te plan could be as simple as wheels and lower it through to somewhat like my earlier post. for simple things likke wheels and suspension there are plenty of shops out there, boib janes and peddars for example. for more serious mods there are more specialist shops but get on the net, especially UK and US sites for the fiesta to see what they are doing and whos products they are useing...but never forget the Australian modifiers/mechanics/suppliers are equal to any in the world so shop here first good luck JP |
||
This user likes this post: |
14-06-2013, 07:58 PM | #13 | |||
having Fiesta withdrawals
Join Date: May 2011
Location: God's Country (The Shire)
Posts: 595
|
Quote:
a) Pretty much anything and depends what you want to spend and what you want out of it. Do you want it to go around corners quicker, do you want it to look better, do you want it to go faster? Going around corners quicker you cannot beat coilovers I had the Eibach springs and found they didn't drop it much lower or make it look much lower. From experience I highly recommend the KW V1 set. However if you want something a bit cheaper I have read pretty good comments about the AP Coilovers. (all available on Pumaspeed) Depending on where you live I had mine installed by east Coast suspension. Any suspension shop like Pedders etc can do them though. Sway bars and strut braces etc, Eibach do a set that looks half decent (also on Pumaspeed) however I run a Steeda rear bar and Ultra racing front Strut brace. Both make the car feel more solid in the corners to a certain extent but I wouldn't rush out and do this modification. For performance you could start with a full exhaust and intake. I had a exhaust done by Hi-tech in Sydney that sounds great and also have done a Pipercross Cold Air intake (on Pumaspeed) which I would also recommend and is quite easy to install yourself. Milltek offer a full exhaust system for these cars which is quite popular in the UK and seems to be quite good. Any exhaust shop could fit this for you. One down side to these cars is the availability of plug in tunes. There is one available from Bluefin which claims to give you a 14BHP benefit however I have not read anything from anyone who has actually used it. 14bhp does not sound like much but it is over a 10% gain in power. If you would like to get a tune done maybe talk to a local tuner who may be able to do a custom tune for you. In the looks department I believe Ford have done quite well with this themself. If you don't have a Zetec. find a wrecker who has a Zetec in the yard and in the same colour and go and get the spoiler off them, also search the ford genuine aluminium pedals and sill plates. They aren't to expensive and are a nice touch. As for wheels it is really up to personal preference. I got the optional 17" wheels which were later standard on the Fiesta Metal and did them in black. I quite like them but they are quite heavy. Hope this helps you or anyone else who is looking at modding. From experience of my own and friends I would not recommend European parts and have heard mixed reviews about Pumaspeed however I found them to be quite good. Some sites such as Central Florida Motorsports in the USA have some alright gear and are much cheaper due to the dollar.
__________________
New: Ford Focus RS in Ultimate Green number 82/315 Past: 2009 Ford Fiesta LX in Vision Blue - Sold |
|||
This user likes this post: |
14-06-2013, 10:33 PM | #14 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,547
|
I had issues with European Parts and wouldn't buy from them again, they sent me a damaged headlight assembly with broken adjusters.
|
||
14-06-2013, 11:31 PM | #15 | ||
www.sctflashtuning.com
Join Date: Jan 2005
Posts: 3,142
|
We can SCT flash tune these cars with good results
__________________
Australia's No1 Ford Enhancement Specialist 103 Northgate Drive Thomastown VIC 3074 Phone: 03 9464 5100 Fax: 03 9464 5166 |
||
4 users like this post: |
15-06-2013, 12:35 AM | #16 | ||
Regular Member
Join Date: Jul 2012
Posts: 497
|
|
||
This user likes this post: |
16-06-2013, 12:58 PM | #18 | |||
having Fiesta withdrawals
Join Date: May 2011
Location: God's Country (The Shire)
Posts: 595
|
Quote:
What results have you got?
__________________
New: Ford Focus RS in Ultimate Green number 82/315 Past: 2009 Ford Fiesta LX in Vision Blue - Sold |
|||
16-06-2013, 01:01 PM | #19 | ||
www.sctflashtuning.com
Join Date: Jan 2005
Posts: 3,142
|
I will try and find a dyno sheet , we have tuned a car that is used for club racing and it made a lot of difference to his lap times and drivability
__________________
Australia's No1 Ford Enhancement Specialist 103 Northgate Drive Thomastown VIC 3074 Phone: 03 9464 5100 Fax: 03 9464 5166 |
||
16-06-2013, 04:03 PM | #20 | ||
having Fiesta withdrawals
Join Date: May 2011
Location: God's Country (The Shire)
Posts: 595
|
Nice. Thanks.
__________________
New: Ford Focus RS in Ultimate Green number 82/315 Past: 2009 Ford Fiesta LX in Vision Blue - Sold |
||
16-06-2013, 09:17 PM | #21 | ||
FF.Com.Au Hardcore
Join Date: Jun 2009
Posts: 612
|
Yeah sounds interesting!
|
||
17-06-2013, 03:02 PM | #22 | ||
Starter Motor
Join Date: May 2012
Posts: 27
|
Thanks again @ vhcbm That really helped clear alot of things that were running around in my mind.
|
||
17-06-2013, 09:49 PM | #23 | |||
having Fiesta withdrawals
Join Date: May 2011
Location: God's Country (The Shire)
Posts: 595
|
Quote:
If you're interested in anything I have it's all mostly up for Sale now.
__________________
New: Ford Focus RS in Ultimate Green number 82/315 Past: 2009 Ford Fiesta LX in Vision Blue - Sold |
|||