Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Shockworks

Shockworks Ford damper specialist located in Melbourne's S.E suburbs. Website Link

Reply
 
Thread Tools Display Modes
Old 06-03-2014, 03:36 PM   #31
dl86
FF.Com.Au Hardcore
 
dl86's Avatar
 
Join Date: Dec 2010
Location: Sydney
Posts: 618
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

On the front.

http://www.enkei.com/rpf1.shtml#

http://www.enkei.com/size_chart/RPF1.pdf

3798856530SP

18 X 8.5 +30

Thanks Natedog. This will help if the inner diameter of the wheel is the same as my stock GT 19" rim. Should give me a starting point.
__________________
FG MKII GT ZF, 444.8rwkw, 61mm YT snout, 1000cc injectors, 460lph fuel pump, big kpm intercooler, shockworks w/12kg front springs, SSR GTX01 18X9.5" +22 F/R, nizpro input shaft, 1pce 4" AL tailshaft, poly bushings all round, trutrac, headerback exhaust 3", whiteline sway bars, IMS diff hat, herrod spark booster, Alpine R type speakers/Alpine R type 2x12" ported subs/Pioneer GM-D9601/8604 amps and other bits
dl86 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 06-03-2014, 05:16 PM   #32
lms_52
Regular Member
 
Join Date: Mar 2013
Posts: 52
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Hey Brett,

If they fit 18s im really keen. If need be i can drive up and test fit and bring one of my old factory 19s to see if they fit as well.

Cheers,
Luke
lms_52 is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2014, 05:54 PM   #33
natedog
Regular Member
 
Join Date: Sep 2011
Posts: 285
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by dl86 View Post
On the front.

http://www.enkei.com/rpf1.shtml#

http://www.enkei.com/size_chart/RPF1.pdf

3798856530SP

18 X 8.5 +30

Thanks Natedog. This will help if the inner diameter of the wheel is the same as my stock GT 19" rim. Should give me a starting point.
These are the stock FPV 19's with the shockworks kit on it, it has 16mm clearance from caliper to inside circumference of wheel, photo attached, so if its the same as your GT rims then you can accurately measure the difference in size with the wheels you have on now I guess....assuming you still have the old Gt 19" wheels somewhere?
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance!
KPM Street fighter stage 2 intercooler with 70mm pulley
1000cc injectors
Herrod Fuel pump
BMC air filter
Built tailshaft
Shockworks Coilovers
Shockworks 4 piston monobloc front brake kit
Herrod oil breather and "special" diff breather kit
19x9.5 rears 19x8.5 fronts with sticky Michelin rubber


Last edited by natedog; 05-06-2014 at 04:47 PM.
natedog is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2014, 08:28 PM   #34
dl86
FF.Com.Au Hardcore
 
dl86's Avatar
 
Join Date: Dec 2010
Location: Sydney
Posts: 618
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

I just did a measurement as accurate as I could and I have 21mm clearance with the Brembo 4 pot and stock GT rim, putting the 18" on that is reduced to about 7mm. It will be really cutting it fine lol

I would need to do a test fit before buying to be comfortable with fitment some how.

__________________
FG MKII GT ZF, 444.8rwkw, 61mm YT snout, 1000cc injectors, 460lph fuel pump, big kpm intercooler, shockworks w/12kg front springs, SSR GTX01 18X9.5" +22 F/R, nizpro input shaft, 1pce 4" AL tailshaft, poly bushings all round, trutrac, headerback exhaust 3", whiteline sway bars, IMS diff hat, herrod spark booster, Alpine R type speakers/Alpine R type 2x12" ported subs/Pioneer GM-D9601/8604 amps and other bits
dl86 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-03-2014, 01:42 PM   #35
natedog
Regular Member
 
Join Date: Sep 2011
Posts: 285
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

I had to give Brett his test brake kit yesterday and in went my old worn out little rotors.

After driving them around through every day stop start, freeway and a few hard braking tests, all I can do is highly recommend these kits once they are released next month!

The street/track pads that I tested were not dusty.

They were not squealy hot or cold.

The pads did not need heat up to work from cold starts like some street/track pads require.

They did not fade....even with me trying to get them to.....all I did was destroy my rear pads!!!! Poor little rotors, they were coming to the end of their lives anyway :-)

My order is in, I am definitely getting the Shockworks brake kit.

When the Shockworks kit was taken off there was no hint of any higher than normal wear from me "trying" to get them to fade on a couple "test" sessions.

Pedal feel is progressive and predictable, there is no hint of them being unpredictably "grabby" at any speed hot or cold.

Awesome front brake upgrade for the $$$

I must thank Brett for letting me test the kit out.....the fact he was willing to lend them to me to try and beat them up a bit after only having met him a month earlier??

Shows the faith he has in the product to lend them to a stranger basically... and he's a good bloke!

Nathan
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance!
KPM Street fighter stage 2 intercooler with 70mm pulley
1000cc injectors
Herrod Fuel pump
BMC air filter
Built tailshaft
Shockworks Coilovers
Shockworks 4 piston monobloc front brake kit
Herrod oil breather and "special" diff breather kit
19x9.5 rears 19x8.5 fronts with sticky Michelin rubber

natedog is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 02-04-2014, 03:51 PM   #36
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Hi Guy's,

We did some measurements on the brake calliper and rotor and from the centre of the hub to the outside of the calliper is 207.5mm. This should help to understand what rims will fit with our brake upgrade.
Cheers
Brett
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2014, 10:46 PM   #37
Shonky.
FF.Com.Au Hardcore
 
Shonky.'s Avatar
 
Join Date: Jul 2011
Posts: 4,819
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Hi guys, looking good, very impressive how quick you've got this kit to market!!

Say, do you know how much this kit weighs, compared to the factory 355mm/4pot Brembos?

Also, is it lighter or heavier than the 355mm dba 5000 series 2 piece rotor?

Cheers
Shonky. is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2014, 10:00 AM   #38
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by shonkymofo View Post
Hi guys, looking good, very impressive how quick you've got this kit to market!!

Say, do you know how much this kit weighs, compared to the factory 355mm/4pot Brembos?

Also, is it lighter or heavier than the 355mm dba 5000 series 2 piece rotor?

Cheers
Hey Shonkymofo,
We don't have a DBA rotor to compare the weights so a bit hard to say. I know we are around 2 Kg lighter than the factory disc. I will get my hands on a Brembo caliper and compare the difference.
We were able to get to market quickly as we already supply brakes through our Korean partner who support many race teams and also supply brake upgrade for many models in their market.
Cheers
Brett
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2014, 11:27 AM   #39
Shonky.
FF.Com.Au Hardcore
 
Shonky.'s Avatar
 
Join Date: Jul 2011
Posts: 4,819
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Nice one, thanks.

Totally understandable that you don't have a dba rotor, but do you know the exact weight of your rotor?
Shonky. is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2014, 01:36 PM   #40
Stazza_Brendan
FF.Com.Au Hardcore
 
Stazza_Brendan's Avatar
 
Join Date: May 2010
Location: Mackay
Posts: 1,237
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Is there an estimated time for these to be on sale?
__________________
Seduce BFII XR6T Ute
ZF - Optioned interior - Hardlid - Rapidsystems V4.5 kit - GTX3576R - Crow Cams Valve springs - 1000cc KPM injectors - 20" MC Racing Wheels - DashDaq/Cobalt Gauges - 4in dump/3.5in exhaust system - Shockworks Coilovers - 30mm Swaybar - Shockworks 4pot 355mm front brakes - GT R-spec rear brakes
CPV Tuned to 340rwkw
Stazza_Brendan is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2014, 02:45 PM   #41
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Hi Shonkymofo,

Our disc comes in at 10Kg mate.

Cheers
Shockworks is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 03-04-2014, 05:34 PM   #42
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Stazza_Brendan View Post
Is there an estimated time for these to be on sale?
Hi Brendan,
We are expecting the brakes by the end of the month as they are being prepared for shipping now via sea. We will be airfreighting in a couple of sets but will split the difference in the cost of this if the demand requires this.

We now have the Goodridge/braided line upgrade as an option for the caliper for $180

Cheers
Shockworks is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 07-04-2014, 11:15 PM   #43
aktg6et
Starter Motor
 
Join Date: Dec 2013
Posts: 11
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Just wondering in terms of replacements pads for these, whether they use a generic pad design and are able use replacement pads from other brands (e.g ferodo, bendix, ebc)
cheers
aktg6et is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2014, 02:13 PM   #44
puck_lindsay
Regular Member
 
Join Date: Aug 2012
Location: Perth
Posts: 30
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

If a 19" G6ET rim will clear these, I'm keen.
__________________
10 FG G6ET - Rocket-powered lounge suite.
430rwkW/950Nm.
puck_lindsay is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-04-2014, 02:36 PM   #45
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by aktg6et View Post
Just wondering in terms of replacements pads for these, whether they use a generic pad design and are able use replacement pads from other brands (e.g ferodo, bendix, ebc)
cheers
Hi,
I am not sure about the Ferodo or Bendix and looking into this now. If we find something, I will post some part numbers. It is a caliper supplied by Hyundai so will be able to get a part number for there replacement. We are importing many sets of pads for the street and track. We are also working with Howard Reynolds at Race Brakes to make a replacement pad that will be available for both street and track.
Will update what we find soon.
Cheers
Brett
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 13-05-2014, 08:16 PM   #46
xr8 007
FF.Com.Au Hardcore
 
xr8 007's Avatar
 
Join Date: Mar 2005
Posts: 1,761
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Shockworks View Post
Hi,
I am not sure about the Ferodo or Bendix and looking into this now. If we find something, I will post some part numbers. It is a caliper supplied by Hyundai so will be able to get a part number for there replacement. We are importing many sets of pads for the street and track. We are also working with Howard Reynolds at Race Brakes to make a replacement pad that will be available for both street and track.
Will update what we find soon.
Cheers
Brett
Same question but with the rotors? Can a generic dba rotor be able to fit? Congrats on the product and look forward to its release.
__________________
Build Thread: BA XR8 with all the goodies.

fordforums.com.au/showthread.php?t=11247663
xr8 007 is offline   Reply With Quote Multi-Quote with this Post
Old 13-05-2014, 08:31 PM   #47
natedog
Regular Member
 
Join Date: Sep 2011
Posts: 285
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

I believe kits may be available as early as next week!

I can't wait!
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance!
KPM Street fighter stage 2 intercooler with 70mm pulley
1000cc injectors
Herrod Fuel pump
BMC air filter
Built tailshaft
Shockworks Coilovers
Shockworks 4 piston monobloc front brake kit
Herrod oil breather and "special" diff breather kit
19x9.5 rears 19x8.5 fronts with sticky Michelin rubber

natedog is offline   Reply With Quote Multi-Quote with this Post
Old 14-05-2014, 07:29 AM   #48
Stazza_Brendan
FF.Com.Au Hardcore
 
Stazza_Brendan's Avatar
 
Join Date: May 2010
Location: Mackay
Posts: 1,237
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Bit disappointed about lack of information over the last 4 weeks. Nothing about the early sets that were going to be sent. Or the delay. Weren't these suppose to be available last month.
__________________
Seduce BFII XR6T Ute
ZF - Optioned interior - Hardlid - Rapidsystems V4.5 kit - GTX3576R - Crow Cams Valve springs - 1000cc KPM injectors - 20" MC Racing Wheels - DashDaq/Cobalt Gauges - 4in dump/3.5in exhaust system - Shockworks Coilovers - 30mm Swaybar - Shockworks 4pot 355mm front brakes - GT R-spec rear brakes
CPV Tuned to 340rwkw
Stazza_Brendan is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 14-05-2014, 08:31 AM   #49
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Stazza_Brendan View Post
Bit disappointed about lack of information over the last 4 weeks. Nothing about the early sets that were going to be sent. Or the delay. Weren't these suppose to be available last month.
Hey Brendan,
Sorry for the info slowing down mate. I have been in Korea for the past three weeks testing and catching up while back for the last couple of days.
The ship has arrived and we will have full stocks of the brake kits next week. There will be a slight delay on the floating rotor assembly as I was not happy with the pin design and are being air freighted on the 22nd. The fixed rotor and calliper will be ready for sale next week though.
Cheers
Brett
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 14-05-2014, 08:35 AM   #50
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by xr8 007 View Post
Same question but with the rotors? Can a generic dba rotor be able to fit? Congrats on the product and look forward to its release.
That is something we will check first before I get carried away. We made the brake upgrade to suit the same offset with the Brembo disc but will test first before I say yes!!
Cheers
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 23-05-2014, 07:39 PM   #51
natedog
Regular Member
 
Join Date: Sep 2011
Posts: 285
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Hi all,

I am getting the Shockworks brake kit put in next Wednesday, looking forward to some real stopping power compared to the stock calipers I've been thrashing round the track.

Poor little discs......

:-)

Will load up some pics once done
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance!
KPM Street fighter stage 2 intercooler with 70mm pulley
1000cc injectors
Herrod Fuel pump
BMC air filter
Built tailshaft
Shockworks Coilovers
Shockworks 4 piston monobloc front brake kit
Herrod oil breather and "special" diff breather kit
19x9.5 rears 19x8.5 fronts with sticky Michelin rubber

natedog is offline   Reply With Quote Multi-Quote with this Post
Old 28-05-2014, 11:07 PM   #52
natedog
Regular Member
 
Join Date: Sep 2011
Posts: 285
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

They went on today....they look gooooood :-)
Attached Images
File Type: jpg image.jpg (150.7 KB, 363 views)
__________________
2010 mk1 GS sedan with 412rwkw thanks to Pitlane Performance!
KPM Street fighter stage 2 intercooler with 70mm pulley
1000cc injectors
Herrod Fuel pump
BMC air filter
Built tailshaft
Shockworks Coilovers
Shockworks 4 piston monobloc front brake kit
Herrod oil breather and "special" diff breather kit
19x9.5 rears 19x8.5 fronts with sticky Michelin rubber

natedog is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 29-05-2014, 01:23 PM   #53
Whitey-AMG
AWD Assassin
 
Whitey-AMG's Avatar
 
Join Date: Dec 2004
Posts: 8,170
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Do you have the rubber or braided lines.
Whitey-AMG is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2014, 01:25 PM   #54
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by ESP View Post
Do you have the rubber or braided lines.
Hi ESP,
We have the Goodridge braided lines for both the BA-BF and the Fg models.
Cheers
Brett
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2014, 01:26 PM   #55
Whitey-AMG
AWD Assassin
 
Whitey-AMG's Avatar
 
Join Date: Dec 2004
Posts: 8,170
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Shockworks View Post
Hi ESP,
We have the Goodridge braided lines for both the BA-BF and the Fg models.
Cheers
Brett
I just bought a set - you better not tell me yours are cheaper.........
PM me.
Whitey-AMG is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2014, 02:49 PM   #56
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Sorry if this was already asked, but these new rotors will fit with the factory Brembo 4/6 pot callipers?
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2014, 03:24 PM   #57
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Pepscobra View Post
Sorry if this was already asked, but these new rotors will fit with the factory Brembo 4/6 pot callipers?
Hey Pepscorba,
We have a different design that suits the Brembo calliper. The Brembo has a smaller disc contact area than our calliper so made a new design for the Brembo's. The Brembo has 57mm of disc contact and our new calliper has 61mm so we have both types.
Cheers
Shockworks is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 29-05-2014, 05:45 PM   #58
Stazza_Brendan
FF.Com.Au Hardcore
 
Stazza_Brendan's Avatar
 
Join Date: May 2010
Location: Mackay
Posts: 1,237
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Do you have more in black? Just got some rear calipers in black and would like to continue the theme.
__________________
Seduce BFII XR6T Ute
ZF - Optioned interior - Hardlid - Rapidsystems V4.5 kit - GTX3576R - Crow Cams Valve springs - 1000cc KPM injectors - 20" MC Racing Wheels - DashDaq/Cobalt Gauges - 4in dump/3.5in exhaust system - Shockworks Coilovers - 30mm Swaybar - Shockworks 4pot 355mm front brakes - GT R-spec rear brakes
CPV Tuned to 340rwkw
Stazza_Brendan is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2014, 06:13 PM   #59
Shockworks
Regular Member
 
Join Date: Jan 2013
Posts: 304
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Quote:
Originally Posted by Stazza_Brendan View Post
Do you have more in black? Just got some rear calipers in black and would like to continue the theme.
Hey brendan,
We have plenty in the black and think it looks very cool for the first time on Natdog's car. We will also offer a couple of options for the colour of the alloy hat like a gun blue and the gold. That will be later in the year once we finish the other Ford range we are working on.

Cheers
Shockworks is offline   Reply With Quote Multi-Quote with this Post
Old 05-06-2014, 03:38 PM   #60
Stazza_Brendan
FF.Com.Au Hardcore
 
Stazza_Brendan's Avatar
 
Join Date: May 2010
Location: Mackay
Posts: 1,237
Default Re: BA-FG Monoblock 4 Pot Brake Upgrade

Not answering PM's?
__________________
Seduce BFII XR6T Ute
ZF - Optioned interior - Hardlid - Rapidsystems V4.5 kit - GTX3576R - Crow Cams Valve springs - 1000cc KPM injectors - 20" MC Racing Wheels - DashDaq/Cobalt Gauges - 4in dump/3.5in exhaust system - Shockworks Coilovers - 30mm Swaybar - Shockworks 4pot 355mm front brakes - GT R-spec rear brakes
CPV Tuned to 340rwkw
Stazza_Brendan is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL