|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Bar For non Automotive Related Chat |
|
Thread Tools | Display Modes |
18-04-2012, 10:21 PM | #1 | ||
Parts Interpreter
Join Date: Oct 2010
Location: In a cloud of tyre smoke
Posts: 2,605
|
Hey guys,
Having a small issue with cleaning of my Eyeglasses. Pretty much I clean with the lint free cloth and the spray and all that but afterwards, there is still like a hazy look through them. As if I'm just spreading the oil over the lense rather than removing it. Anyone wanna share the way you clean your glasses to remove all of the oil rather than spreading it? I know, it's a strange place to post but I rather not sign up to another forum to something people may not post in lol.* |
||
18-04-2012, 10:29 PM | #2 | ||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
New cloth perhaps?..
See if your local optomatrist has this cleaner that looks like a tub of clear cleaning solution (water?) that vibrates. Don't know what they are called, but in Korea almost every optomatrist has one on the counter for all to use for free... pop glasses in, turn on and after 20 seconds they come out clean. Don't know the process, but the dirt and grime in every nook and cranny just floats off. I don't use cloth and spray, just tissue and water BTW.
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
||
18-04-2012, 10:58 PM | #3 | ||
Regular Member
Join Date: Oct 2008
Location: Perth
Posts: 267
|
My wife orders a fair bit of crap from clearance websites.
One of those orders contained some microfibre cloths. They look like a terry towel face washer (as opposed to microfibre glass cleaners) and they simply amazing - I have never seen cleaner glass after using them. You could probably pick up similar from SCA/Repco or Bunnings - I reckon I have seen them there before. |
||
18-04-2012, 11:02 PM | #4 | ||
Join Date: Dec 2004
Posts: 9,292
|
Is it hazy oil or is the hardcoat peeling.
Every single pair Ive had for the last 10 years, the hardcoat has peeled on them. At first it just looks like something is stuck to the lense, but it never seems to wipe off. After a while it seems to get bigger, then you try and pick it off only to find youve just made it biggger again - thats the hardcoat peeling. Its like a white hazy patch where it peels. Otherwise, if it is oil, just take them in the shower, get the shampoo and give them a good tub. Dry with soft paper towel and theyll be as good as new. |
||
18-04-2012, 11:14 PM | #5 | ||
Parts Interpreter
Join Date: Oct 2010
Location: In a cloud of tyre smoke
Posts: 2,605
|
Nah it's a hazy type thing.
|
||
18-04-2012, 11:16 PM | #6 | ||
Join Date: Dec 2004
Posts: 9,292
|
Shampoo, hot water, pat dry with paper towel and report back.
|
||
18-04-2012, 11:17 PM | #7 | ||
Lucifer's Angel
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
|
I've all but given up on cleaning any of mine. My eyelashes are FAR too long, and rub on the lenses, so they're permanently grubby.
Occasionally I have forgotten I was wearing them and jumped into the shower, wondering why it was so steamy in the bathroom..."oh bugger", might try giving them a clean while I'm there next time I do it.
__________________
SINISTER BA XR6 Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!
If there's one thing guys in Holdens hate more than being beaten by a Ford... It's being beaten by a girl driving a Ford |
||
19-04-2012, 10:30 AM | #8 | |||
Former BTIKD
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
|
Quote:
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
|
|||
19-04-2012, 11:04 AM | #9 | |||
FF.Com.Au Hardcore
Join Date: Jan 2012
Location: outback S.A...hiding in a workshop
Posts: 3,513
|
Quote:
what I do with mine is to use the cleaner stuff you spray your plasma tv with then give them a good wipe with a microfibre cloth....seems to work
__________________
--------------------------------------------------------------- G'day....I'm Dave, ...everyone calls me Poppa,..05.. B.A. Fairmont mark II... may your day's be filled with smiles, your life be filled with love, may your children know nothing but happiness and joy, cherish the memory of those who strove before us for they cleared the way, spare a thought for those who serve we owe so much to so many, life and the freedom to enjoy it is a special gift that can be taken away far too soon! |
|||
19-04-2012, 11:09 AM | #10 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Posts: 12,077
|
Quote:
|
|||
19-04-2012, 11:35 AM | #11 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Glass Lenses with metal frame? Spray em with "Kenko Shift It", let em soak for a minute or so then rinse off with warm water and dry with a soft cotton cloth. Works a treat in my engine bay. Dunno about plastic lenses, might begin to dissolve them.
|
||
19-04-2012, 11:44 AM | #12 | ||
Regular Member
Join Date: Nov 2006
Posts: 282
|
Be very careful with what you use as even the special cleaning products supposedly for cleaning glasses can cause damage. Products with certain types of "anti-fogging" solution can destroy your lenses. Advice from one of my contractors who supplied our industrial prescription safety specs was that the Protecta brand lens cleaning fluid found in many workshop situations will crack polycarbonate lenses.
Most glasses come in either CR39 (Columbian Resin #39) or polycarbonate. The CR39 group is the cheaper lens material and is limited in its capacity for high end lenses. CR39 has a low resistance to impact and will crack in a glass like manner if subect to stress. CR39 has a good resistance to scratching. Polycarbonate lenses, which are generally the lens of choice are much stronger, can achieve higher magnification values and will sustain a higher impact but are more sensitive to chemicals and scratching. Do not use any solution containing alcohol on poly lenses. Dayway, lenses, be it a camera lens or prescription spectacles are built like tinting the windows of a car. Want sunglasses, then apply a coloured film and vacuum seal it to the lens, want anti-reflection then add another layer to the inside, want polariod then use the polaroid film instead of the plain tinted. And like a car, use the wrong fluid on the tinting and you loosen the adhesive and it will peel away. The best fluid may in the end be the one supplied by your optomitrist. With the cost of my glasses which is nearly $1k, my optomitrist usually throws in 3 or 4 little bottles of Karl Zeiss cleaning fluid. It works well and is non-flammable which is good for plane flights.
__________________
__________________________ They call it a rort when they're not in on it Mark |
||
19-04-2012, 12:15 PM | #13 | ||
Formerly ST170ish
Join Date: Jan 2005
Location: Down south
Posts: 1,672
|
Does the design of your frames allow them to touch your brow's or lashes... common mistake as they will oil up
|
||
19-04-2012, 01:35 PM | #14 | ||
Regular Member
Join Date: Aug 2007
Location: Melbourne's outer west
Posts: 168
|
I just use handsoap and a micro fibre cloth. They come up perfectly
__________________
HIS: AU III XR8 220, 5 speed manual, short shifter, MSD coils, ACRON CAI, Front 330mm brakes with C4 calipers and braided lines HERS: BA Fairmont, vapour injected LPG I reject your reality and substitute my own! |
||
19-04-2012, 02:20 PM | #15 | ||
trigger happy
Join Date: Jan 2011
Location: Victoria
Posts: 149
|
wearing glasses, i've only ever used metho and paper towel and always works a treat clean clear
__________________
2011 FPV GS ute Sunburst build no 202 manual leather seats car mats 376rwkw with defilipo catback Air filter CAI enhanced by team at Blue Power Racing Developments Now sold off and no longer owns a ford |
||
19-04-2012, 04:23 PM | #16 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Newcastle
Posts: 1,061
|
just a tip for people out there, if you are cleaning with tissues, make sure they aren't the 'aloe vera' tissues - i think it was mum that couldn't work out why her glasses weren't clean
__________________
-Tim |
||
19-04-2012, 08:15 PM | #17 | |||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
Quote:
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
|||
19-04-2012, 08:37 PM | #18 | ||
Ploppy pants
Join Date: Aug 2010
Location: Melbourne-ish
Posts: 1,547
|
I just use my t-shirt.....
__________________
Don't wait to be told.....you need Palmolive Gold!! |
||
19-04-2012, 09:06 PM | #19 | ||
FF.Com.Au Hardcore
Join Date: Mar 2007
Location: Adelaide SA
Posts: 1,255
|
Them little spray bottles of lens cleaner work fine for me and i always use a soft cloth/good quality microfibre. Used to use tissue and shirts etc but found they finely scratch the lens, similar to swirl marks in your car paint. Once used a tea towel and it put a decent scratch along the whole front of the lens. Was so frustrating after cause you know it's there and it's not like you can have a look away
|
||
20-04-2012, 11:00 AM | #20 | ||
Regular Member
Join Date: Jun 2010
Posts: 95
|
I use IPA (Iso Proply Alcohol) to clean mine.
No residue , no smearing. Apply IPA and wipe all over the lens. Let dry and then spray again and wipe immediately to clean. Available from any electronics place (Dick Smith etc) in both spray and pump packs. One caution though...IPA will give you headaches like nothing else. Clean the glasses before bed and let them stand overnight so the IPA fumes are totally gone. Peter. |
||
20-04-2012, 11:36 AM | #21 | ||
BIG MEMBER ;)
Join Date: Sep 2009
Location: Sydney, NSW
Posts: 940
|
Are you a sweater? I can't even wear glasses or sunnies on most occasions because my body gives off so much heat and I get this haze all the time.
__________________
2010 FG XR6T, EGO, MANUAL, LUXURY PACK.
|
||
20-04-2012, 11:58 AM | #22 | |||
FF.Com.Au Hardcore
Join Date: Jan 2012
Location: outback S.A...hiding in a workshop
Posts: 3,513
|
Quote:
__________________
--------------------------------------------------------------- G'day....I'm Dave, ...everyone calls me Poppa,..05.. B.A. Fairmont mark II... may your day's be filled with smiles, your life be filled with love, may your children know nothing but happiness and joy, cherish the memory of those who strove before us for they cleared the way, spare a thought for those who serve we owe so much to so many, life and the freedom to enjoy it is a special gift that can be taken away far too soon! |
|||
21-04-2012, 04:48 AM | #23 | ||
Regular Member
Join Date: Aug 2008
Location: Near Ballarat
Posts: 469
|
Ok
Advice from someone in the trade.Use metho them and tissue to clean them. If they are still hazy will be time for new lenses. Do you have multicoat/anti reflection coating on lenses? If yes the coating maybe crazing which is common particularily if lenses are polycarbonate. Never get talked into polycarbonate for your lenses its optical properties are crap and scratches so easily. There are much better materials out there. |
||
21-04-2012, 05:05 AM | #24 | ||
1 is good but 2 is better
Join Date: Dec 2007
Location: In The Drivers Seat, But Which One?
Posts: 1,769
|
Autoglym Fast Glass and a good quality microfibre cloth works brilliant.
|
||
21-04-2012, 05:53 AM | #25 | ||
Cynical Idealist
Join Date: Jan 2012
Location: Orlando, FL, USA
Posts: 1,512
|
I use these:
__________________
Your plastic pal who's fun to be with! |
||
21-04-2012, 08:58 AM | #26 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Posts: 891
|
Similar to above, I use Clearwipes:
They come in packs of 20 sachets for about $5.00. They do a great cleaning job and are convenient to have in your drawer at work, in the glovebox etc. Get them from most chemists. |
||
21-04-2012, 10:58 AM | #27 | |||
FF.Com.Au Hardcore
Join Date: Sep 2009
Posts: 1,316
|
Quote:
I am blind as a bat, lenses are generally 600+ dollars and ground overseas. I'm due new lenses now, not because my sight has changed which it hasn't in about 10 years, but the lenses are shot two years down the track. Who and what do recommend? I go the highest index lense to achieve the thinnest and lightest spec.
__________________
2015 FG-X XR6 Turbo Ute Silhouette. ZF. Single hump hard lid. XR8 Bonnet Colour coded mirrors. Tint. Reverse camera. K&N. More down the track... |
|||
21-04-2012, 07:57 PM | #28 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i use hand soap or dishwashing detergent put on with the finger liberally, then run hot water out the tap over them, polish them off dry with a tissue, come up crystal clear.
|
||
21-04-2012, 08:26 PM | #29 | ||
Regular Member
Join Date: Aug 2008
Location: Near Ballarat
Posts: 469
|
Badmax do you know what your prescription is and what sort of lenses and what refractivew index (the higher the index the thinner the lens) They should definitely be lasting longer than six months. You can still get lenses that are ground on Oz some place do source the lenses from China and Thailand.
Cheers Steve |
||
22-04-2012, 11:16 AM | #30 | |||
335 - STILL THE BOSS ...
Join Date: Dec 2004
Location: Melb East
Posts: 11,421
|
Quote:
__________________
'73 Landau - 10.82 @ 131mph '11 FG GT335 - 12.43 @ 116mph '95 XG ute - 3 minutes, 21.14 @ 64mph 101,436 MEMBERS ......... 101,436 OPINIONS ..... What could possibly go wrong! Clevo Mafia [SIGPIC][/SIGPIC] |
|||