Hard to get bits Wanted or For Sale - Page 22

XA Coupe 666 · 05-10-2015, 12:21 PM

XA or XB coupe 6 cyl block. JG65xx or JG67xx. Anyone got one they want to sell?

I have an XA Fairmont coupe roller that I was contemplating all sort of engine combos

393 Cleveland, 408 Windsor, Turbo XR6 & 6 speed auto etc.

Then I had a thought. It was originally a 6 so why not something a little different & do a 2v 6 cylinder?

I already have a reco head ready to go, was going to put in a XA ute.

Missed one on Evilbay that already had a 2v head on it, went for about $1150, mainly because of the head I'm thinking.

Not looking to pay anywhere near that but just thought I'd put the word out & see how it goes.

Thanks. Neale 0427334186

BGBLOK · 05-10-2015, 02:50 PM

Admin please remove, all parts have sold!...

Quote:

Originally Posted by BGBLOK

I have 1 XA GT/GS sports dash instrument surround with no instruments & 1 XB, grained GS/GT sports dash with no speedo or tacho.
$100 for the XA surround and $160 for the XB one.
Also one XB drivers side front guard "eyebrow" or guard extension piece in good nick. $50
Parts are in Perth
msg or email me proactms@bigpond.com

BGBLOK · 14-10-2015, 06:47 PM

Quote:

Originally Posted by BGBLOK

I have 1 XA GT/GS sports dash instrument surround with no instruments & 1 XB, grained GS/GT sports dash with no speedo or tacho.
$100 for the XA surround and $160 for the XB one.
Also one XB drivers side front guard "eyebrow" or guard extension piece in good nick. $50
Parts are in Perth
msg or email me proactms@bigpond.com

SOLD Admin please remove

v8ltd · 09-12-2015, 12:48 PM

Hi all, I am chasing the following parts for my Landau:

- Taillight corner moulding sections
- Parcel Shelf
- External sill moulds
- Roof gutter moulding (both sides)

penske61 · 06-01-2016, 06:16 PM

Anyone got an XA or XB GS or GT steering wheel sitting around doing nothing? Happy to pay a reasonable amount, but not drug money!
Mark, 0499079339

drew1two · 26-01-2016, 12:11 PM

Hi All,
I have a 78 fairmont coupe and am looking for replacement grommets for my firewall. Mainly the Loom one. I thought they'd be in a kit, but can't find a complete kit anywhere.

Anyone have some spare firewall grommets?

Thanx in advance.

Seasoned One · 26-01-2016, 03:34 PM

I'm looking for a 67 xr/t za/b bonnet ?

have a few bits and pieces zd ac dash face / Windsor bits / misc trims etc , leftovers from various builds. currently rebuilding 67 xr ute, sep 66, xr Fairmont 289

Seasoned One · 26-01-2016, 04:09 PM

oh, also have 66 200ci mustang engine in good running order

Pinkbits · 26-01-2016, 05:26 PM

Quote:

Originally Posted by Seasoned One

I'm looking for a 67 xr/t za/b bonnet ?

have a few bits and pieces zd ac dash face / Windsor bits / misc trims etc , leftovers from various builds. currently rebuilding 67 xr ute, sep 66, xr Fairmont 289

This is for XA-C coupes only.
Try here;
http://www.fordforums.com.au/forumdisplay.php?f=28
Or here;
http://www.fordforums.com.au/forumdisplay.php?f=43

Seasoned One · 27-01-2016, 09:56 AM

my bad, THANK YOU !

henryman · 17-04-2016, 09:17 PM

Looking for a XB GT Coupe back seat and stainless back window moulds. Any condition considered. You might have some sitting next to your pile of rocking horse cr@p and chickens teeth? If you can help me, Please reply. Cheers, Steve.

XA Coupe 666 · 18-04-2016, 09:29 AM

Quote:

Looking for a XB GT Coupe back seat and stainless back window moulds

There's a seat on ebay for $600. "Dreamin" but they have been coming up from time to time.

http://www.ebay.com.au/itm/Ford-xb-c...YAAOSwoBtW6RP2

There are no trims ATM but they are on regularly but range from $100 a set to many $$$$$$

You can set up searches that alert you when they are listed.

TS50AU · 18-04-2016, 03:28 PM

Also remember to ask for Fairmont for the trims etc.
Some people don't know what they have beyond their own experience (mostly outside this forum).

henryman · 18-04-2016, 03:42 PM

Thanks guys, Saw the black rear seat on evil bay. No armrest has me waiting for a better one. Would consider it if it was correct for GT or for about half what hes asking and graft a Fairmont arm rest into it. May have a lead for the rear screen trims!

Aussie67 · 08-05-2017, 04:10 PM

Hi

Im looking for a couple of pieces for my Landau. If anyone has any pieces laying around or can point me in the right direction it would be greatly appreciated.

1) Both front indicator lenses, Landau and P5 mount in bumper
2) Roll of Bump strip for side of car, to match Chocolate brown padded roof.

Any help greatly appreciated

Peter

CJR09 · 27-08-2017, 05:29 PM

Chasing some factory louvre hinges if anyone has some floating around?

Sar4890 · 27-08-2017, 07:24 PM

Im still looking for the windscreen wiper and heater knobs for a 1967 ford falcon futura sports coupe they are not the same as the domestic version the us fairlanes of the same era maybe the same. Unfortunately they are not available repo that im aware of.

Hemihunter · 05-02-2021, 12:56 PM

Is this thread still active ?

Looking for the Chrome Mould on Rear drivers side next to taillight to suit - XC hardtop Fairmont

BAWITHLOT · 05-02-2021, 01:34 PM

Quote:

Originally Posted by Hemihunter

Is this thread still active ?

Looking for the Chrome Mould on Rear drivers side next to taillight to suit - XC hardtop Fairmont

Good luck, I've been looking for 23 years! I did get an offer of $2.5K for a set but I already had the strip for the boot.

Hemihunter · 08-02-2021, 06:53 AM

I think i could make new ones for 2500... crazy world for coupes at the moment.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode