Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 19-02-2014, 06:05 AM   #31
xxx000
FF.Com.Au Hardcore
 
Join Date: Aug 2007
Posts: 1,874
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by zilo View Post
Someone please show me where Alcoa management have said that the CARBON TAX has had anything whatsoever to do with the plant closure?

Go ahead....make my day?
Correct
they gave 3 reasons and none were the carbon tax
xxx000 is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 19-02-2014, 06:37 AM   #32
Charliewool
Bolt Nerd
Donating Member3
 
Charliewool's Avatar
 
Join Date: Jan 2005
Location: Ojochal, Costa Rica (Pura Vida!)
Posts: 15,103
Default Re: Alcoa closes Point Hay

The Alcoa Anglesea power station will no doubt also go?
Isn't this used to back up the grid during high use peaks?
Be interesting how electricity supply copes during future summer heat waves?
__________________
Current vehicles.. Yamaha Rhino UTV, SWB 4L TJ Jeep, and boring Lhd RAV4
Bionic BF F6... UPDATE: Replaced by Shiro White 370z 7A Roadster. SOLD
Workhack: FG Silhouette XR50 Turbo ute (11.63@127.44mph) SOLD
2 wheels.. 2015 103ci HD Wideglide.. SOLD
SOLD THE LOT, Voted with our feet and relocated to COSTA RICA for some Pura Vida!
(Ex Blood Orange #023 FPV Pursuit owner : )
Charliewool is online now   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 07:24 AM   #33
Bowser22
Regular Member
 
Join Date: Mar 2013
Posts: 128
Default Re: Alcoa closes Point HENRY

Anglesea power station was used to power one potline at Point Henry. It too will go the same way as the smelter, local residents will heavily object to it's licence renewal.

Alcoa paid $137,000,000 collectively for all its sites across Australia. Point Henry has an approx. 95% exemption from carbon tax.
__________________
SZ TS Territory TDCi '13
WQ LX Fiesta '08
XG Falcon '94
Bowser22 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 07:51 AM   #34
nuthin' fancy
Lyminge, Shepway, Kent
 
nuthin' fancy's Avatar
 
Join Date: Oct 2008
Location: Geelong - Go Cats
Posts: 3,197
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by Charliewool View Post
The Alcoa Anglesea power station will no doubt also go?
Isn't this used to back up the grid during high use peaks?
Be interesting how electricity supply copes during future summer heat waves?
It is going to be put up for sale.
__________________
Mel Brooks sums it up best;

"Comedy is when you fall into an open sewer and die, tragedy is when I get a paper cut"
nuthin' fancy is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 08:22 AM   #35
castellan
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Posts: 2,215
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by EDManual View Post
The thing is at alcoa everyones pretty much "rich", they'll all get their massive payouts, and many will not ever have to work again.
The younger family guys probably live to their high wages though so may have to downsize their houses. I know of a few who are just waiting to retire...and are quite young too! (40's)

But yeah, lots of electricity used by Alcoa, Ford, Holden, Toyota will give lots of capacity but the electricity companies will want EXACTLY the same total amount of revenue to cover their costs, so our bills will what DOUBLE!? Great...
What will happen is the supply costs to us will go up, so even if we use less we still get charged more. Same happened with water during the drought, we used less, but they still wanted the same money, so the supply charges went up to cover it.
Well the gov won't have to pay them the rocken roll for a few years and by then all the so called new jobs will be created.
castellan is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 09:24 AM   #36
EDManual
FF.Com.Au Hardcore
 
EDManual's Avatar
 
Join Date: Mar 2005
Posts: 1,710
Default Re: Alcoa closes Point Hay

true, the blokes getting their big payouts (200g +) can live off that for quite a few years, without getting the dole, so theres no reason for any change in housing markets around geelong for at least 3 years? Then they should have got a job or have retired anyway.
EDManual is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 09:57 AM   #37
nuthin' fancy
Lyminge, Shepway, Kent
 
nuthin' fancy's Avatar
 
Join Date: Oct 2008
Location: Geelong - Go Cats
Posts: 3,197
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by EDManual View Post
true, the blokes getting their big payouts (200g +) can live off that for quite a few years, without getting the dole, so theres no reason for any change in housing markets around geelong for at least 3 years? Then they should have got a job or have retired anyway.
Plenty will donate their payouts to the Leopold Sporting Club and the Peninsula Hotel.

Plenty will try the FIFO path, their skills won't be required in Geelong and unlike the Ford employees, they have a pretty short period of time to make adjustments.
__________________
Mel Brooks sums it up best;

"Comedy is when you fall into an open sewer and die, tragedy is when I get a paper cut"
nuthin' fancy is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 11:47 AM   #38
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default Re: Alcoa closes Point Hay

Just the beggining , decades of idealistic government policy has stuffed us
and we are almost an industrial backwater,
10 million tax payers for the whole country quickly heading to 9 million.

We sold out our manufacturing and industry years ago and now it's coming back to bite us on the backside.
mik is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-02-2014, 11:59 AM   #39
Bowser22
Regular Member
 
Join Date: Mar 2013
Posts: 128
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by nuthin' fancy View Post
Plenty will donate their payouts to the Leopold Sporting Club and the Peninsula Hotel.

Plenty will try the FIFO path, their skills won't be required in Geelong and unlike the Ford employees, they have a pretty short period of time to make adjustments.
This is what will bite the majority of workers. Sparkies, fitters, mechanics, etc. have a trade behind them and will need minimalistic retraining. The guys who tapped metal, set carbon and drove forklifts are in deep sheet.
__________________
SZ TS Territory TDCi '13
WQ LX Fiesta '08
XG Falcon '94
Bowser22 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 12:06 PM   #40
XWGT
Powered by Marshall
 
XWGT's Avatar
 
Join Date: Jan 2005
Posts: 1,143
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by Charliewool View Post
"Rich" eh??
A scenario.. A 45 yr old, worked at Alcoa (OR Ford OR any of the other major players closing) for 25 yrs....
Assumming wage of say.. 90k per annum, married, 2 kids at secondary school, 40% through a 350k mortgage.. How much does he get in his redundancy package?
My guess would be, maybe 200-230k?
Ok, a fair whack in one bite.. But that 200 odd won't even be remembered 5 or 6 yrs down the track because it'll be bloody GONE..
Meanwhile, the ONLY job "Joe Blow" has ever had was making ally at Alcoa or cars at Ford.. and is virtually unemployable after he's gone through his "rich" payout and turned 52-53!!
Do tell how "rich" he is for the next 30 years of his life??
I've said it before and I'll say it again. $200k is enough to fund an entire 4 year University Degree for gods sake!
Thousands of people every day leave jobs in this country with 4 weeks pay in their pocket and that's it.
No one is unemployable. Everyone has a chance. And quite frankly someone has a much better chance of retraining and redeploying with $200,000 in their pocket that someone with $2,000.

Anyone who was half smart and half employable will be re-employed within 6 months and have $150k in their back pocket to offset and initial salary decrease or relocation expenses.

So can we quite the drama and scaremongering and get on with life please?
__________________
Powered by Marshall
XWGT is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 19-02-2014, 12:59 PM   #41
ratter
FF.Com.Au Hardcore
 
ratter's Avatar
 
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Shares his in-depth tuning knowledge with the forum, very helpful. Contributor: For members who make a contribution worthy of recognition. - Issue reason: For his indepth tutorial on adding borders to photographs 
Default Re: Alcoa closes Point Hay

what about those that are older?
__________________
Pit Lane Performance
20 Rosella St Frankston 03 9783 8122

Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
ratter is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 01:08 PM   #42
XWGT
Powered by Marshall
 
XWGT's Avatar
 
Join Date: Jan 2005
Posts: 1,143
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by ratter View Post
what about those that are older?
What is to stop anyone of any age reskilling, re-educating or redeploying?

When you have $200k in your pocket you have plenty of time to sort out a solution. Lots of time.
__________________
Powered by Marshall
XWGT is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 02:20 PM   #43
ratter
FF.Com.Au Hardcore
 
ratter's Avatar
 
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Shares his in-depth tuning knowledge with the forum, very helpful. Contributor: For members who make a contribution worthy of recognition. - Issue reason: For his indepth tutorial on adding borders to photographs 
Default Re: Alcoa closes Point Hay

oh good, so nobody has a problem



reality is, many older people in the workforce find it difficult to get re-employment no matter how skilled they are.
__________________
Pit Lane Performance
20 Rosella St Frankston 03 9783 8122

Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
ratter is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-02-2014, 03:40 PM   #44
Polyal
The 'Stihl' Man
Donating Member2
 
Polyal's Avatar
 
Join Date: Jan 2005
Location: TAS
Posts: 27,591
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by ratter View Post
oh good, so nobody has a problem



reality is, many older people in the workforce find it difficult to get re-employment no matter how skilled they are.
I understand where you are coming from, my father, who long ago was a supervisor, then fell out of it and has been doing different jobs in between had a stroke a few months back. His 65 (I think) and has no real skills other than lots of different experiences.

Anyway, he did a course in traffic management, $1000 later walks out with a ticket and now earns that a week spinning a traffic sign. But it took nearly 3-4 months of applying to get there. I honestly wasnt sure if he would land something because of his age but these people need to think about what they can do not what they want to do (age dependent).

There are so many people that loose their jobs with no notice and no payouts.

Its still a horrible thing to go through, and I fear in the short term Geelong is going to turn into a ghetto.
__________________
  • 2017 Toyota Prado (work hack)
  • 2017 Mitsubishi Pajero Sport
  • 2003 CL7 Honda Accord Euro R (JDM) - K20A 6MT
  • 1999 Lexus IS200 - 1G-FE Turbo 6MT
  • 1973 ZF Ford Fairlane
Polyal is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-02-2014, 03:58 PM   #45
XWGT
Powered by Marshall
 
XWGT's Avatar
 
Join Date: Jan 2005
Posts: 1,143
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by ratter View Post
oh good, so nobody has a problem



.
No. Lots of people have problems and lots more are going to have problems.

Luckily however due to generous redundancy packages and ample notice (3 years in some cases) the solutions available to them are much greater than the normal redundancy / termination scenarios most people find themselves in.
__________________
Powered by Marshall
XWGT is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-02-2014, 04:07 PM   #46
cheap
Wirlankarra yanama
 
cheap's Avatar
 
Join Date: May 2006
Location: God's Country
Posts: 2,103
Default Re: Alcoa closes Point Hay

Hypothetical job's - there are lots of these.

It is an employers market, they pick and chose. A middle aged guy, working on the factory floor paints a certain stereotype, likewise a pencil pusher employed for 20 years in a government dept paints a certain stereotype too. Being part of the union movement will not help either.

Regardless of all the "paper based skills" people have, employers pick people with practical experience, malleable mindsets and good looks (not necessarily in that order).
cheap is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-02-2014, 08:02 PM   #47
Kieron
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Location: Perth WA
Posts: 1,204
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by Charliewool View Post
"Rich" eh??
A scenario.. A 45 yr old, worked at Alcoa (OR Ford OR any of the other major players closing) for 25 yrs....
Assumming wage of say.. 90k per annum, married, 2 kids at secondary school, 40% through a 350k mortgage.. How much does he get in his redundancy package?
My guess would be, maybe 200-230k?
Ok, a fair whack in one bite.. But that 200 odd won't even be remembered 5 or 6 yrs down the track because it'll be bloody GONE..
Meanwhile, the ONLY job "Joe Blow" has ever had was making ally at Alcoa or cars at Ford.. and is virtually unemployable after he's gone through his "rich" payout and turned 52-53!!
Do tell how "rich" he is for the next 30 years of his life??
I'd be surprised if this person was in that situation, if he was 40% through a mortage, that would suggest he purchased that house around 2002 making him 33 at the time, fairly late in purchasing a first home.

I don't know Geelong property values but I suspect a typical family home there back in 2002 would be around $250K max? 10% deposit = $225K mortgage and 40% into that = $135K.

Potentially pay off the home which leaves around 1 years pay to retrain/find another job which doesn't have to be as high paying given the mortgage is sorted.
Kieron is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-02-2014, 09:19 PM   #48
buggerlugs
If it ain't broke........
Donating Member1
 
Join Date: Dec 2007
Location: Sunshine Coast Qld
Posts: 18,878
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by zilo View Post
Someone please show me where Alcoa management have said that the CARBON TAX has had anything whatsoever to do with the plant closure?

Go ahead....make my day?
The silence is deafening eh.............
__________________
Visitors welcome
Relatives by appointment only
buggerlugs is online now   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-02-2014, 09:34 PM   #49
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by buggerlugs View Post
The silence is deafening eh.............
I love catching bull sheeters out....
zilo is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 19-02-2014, 10:03 PM   #50
Chocko
Regular Member
 
Chocko's Avatar
 
Join Date: Dec 2011
Location: Geelong, Victoria
Posts: 192
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by Bowser22 View Post
As do I, I've heard many stories that they've buried so much waste around land which have a 100 year lease. On would hope that they'd attempt to return it to what it was (a swampy marsh)
Careful repeating stories that you hear. I don't want to burst any conspiracy theorist's bubbles but they don't go around burying waste in the ground. I know because I work there (for now). They do however have a deal in place that if the plant ever shuts then the site has to be repatriated to its original condition and that's going to cost them a fortune.

Oh, and there won't be that many payouts of $200K plus. I've been there for near on 25 years and I'll give you the tip that if our redundancy is based on the provision in our EBA I won't be anywhere near $200K. We're obviously going to try over the next six months to get a better deal but there's certainly no guarantees on that.

Also I saw mentioned above that Point Henry uses 25 or 30 percent of Victoria's power. It's actually about 6 percent which is still a pretty big chunk. I don't know what they're actually paying for power down there, I've asked the question but it's confidential, but if I had to have a calculated guess I'd say somewhere about 4 cents per kilowatt hour. Go have a look at your power bill and see how that compares, they're getting power dirt cheap.

And will you blokes please let this carbon tax waffle go. There are two major factors that are bringing about this closure. One, the glut of aluminium worldwide caused by an oversupply particularly from plants in China. Many of them receive government funding that allows them to continue to operate at a loss so that they're able to influence the LME price for aluminium and squeeze out their competitors. That is causing a dramatic drop in our revenues.

Two, as mentioned elsewhere we have a 50 year old plant. Total capacity of the smelter is about 180 000 tonnes a year. The plant in Saudi Arabia that has just come online last year has a capacity of about 500 000 tonnes. We struggle to compete with the technology in those newer plants, some of the machines in our plant were second hand when they were installed in the sixties!

And, like most exporters in this country, we're being hurt by the high Aussie dollar. We trade in greenbacks but our outgoings here (wages, production inputs etc.) are paid for in local currency.

Anyhew, enough of my waffling. Just thought I'd set the record straight on a few details. I'm off to polish my resume.

Cheers.
__________________
My Build Thread
Chocko is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2014, 10:57 PM   #51
jpblue1000
FF.Com.Au Hardcore
 
jpblue1000's Avatar
 
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
Default Re: Alcoa closes Point Hay

Quote:
Originally Posted by Chocko View Post
Careful repeating stories that you hear. I don't want to burst any conspiracy theorist's bubbles but they don't go around burying waste in the ground. I know because I work there (for now). They do however have a deal in place that if the plant ever shuts then the site has to be repatriated to its original condition and that's going to cost them a fortune.

Oh, and there won't be that many payouts of $200K plus. I've been there for near on 25 years and I'll give you the tip that if our redundancy is based on the provision in our EBA I won't be anywhere near $200K. We're obviously going to try over the next six months to get a better deal but there's certainly no guarantees on that.

Also I saw mentioned above that Point Henry uses 25 or 30 percent of Victoria's power. It's actually about 6 percent which is still a pretty big chunk. I don't know what they're actually paying for power down there, I've asked the question but it's confidential, but if I had to have a calculated guess I'd say somewhere about 4 cents per kilowatt hour. Go have a look at your power bill and see how that compares, they're getting power dirt cheap.

And will you blokes please let this carbon tax waffle go. There are two major factors that are bringing about this closure. One, the glut of aluminium worldwide caused by an oversupply particularly from plants in China. Many of them receive government funding that allows them to continue to operate at a loss so that they're able to influence the LME price for aluminium and squeeze out their competitors. That is causing a dramatic drop in our revenues.

Two, as mentioned elsewhere we have a 50 year old plant. Total capacity of the smelter is about 180 000 tonnes a year. The plant in Saudi Arabia that has just come online last year has a capacity of about 500 000 tonnes. We struggle to compete with the technology in those newer plants, some of the machines in our plant were second hand when they were installed in the sixties!

And, like most exporters in this country, we're being hurt by the high Aussie dollar. We trade in greenbacks but our outgoings here (wages, production inputs etc.) are paid for in local currency.

Anyhew, enough of my waffling. Just thought I'd set the record straight on a few details. I'm off to polish my resume.

Cheers.
Thanks Chocko, your honesty and insider knowledge is appreciated. Good luck with the future
JP
jpblue1000 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-02-2014, 11:16 PM   #52
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default Re: Alcoa closes Point Hay

I absolutely hate looking for work, I find it very stressful, and I imagine everyone getting the bullet wont be walking out with 200k in their pockets, work location is another consideration, for some people losing a job and finding something that suits their skill set and not big kilometres away from home will be very hard.
And not every one picks up a new skill set like buying a pack a winny blues from the shop.
some of these people will be doing it very tuff indeed.
mik is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-02-2014, 09:04 AM   #53
Jacko*
FF.Com.Au Hardcore
 
Jacko*'s Avatar
 
Join Date: Jun 2011
Location: Gladstone Qld
Posts: 664
Default Re: Alcoa closes Point Hay

Thanks for clarifying the situation Chocko. I also work in the same industry, only for a different employer. I heard about the closure a couple of days ago & I can't say I was shocked. I know the challenges the industry you speak of (over supply to the market & the subsequent low price per tonne on the LME. The high AU dollar e.t.c.) We are doing all we can as employees to cut costs & improve productivity but the situation has been slowly worsening. This summer we had the added challenge of losing access to part of our electricity supply which meant we had to cut production. Restructuring has seen some jobs become redundant but thankfully the number roles lost has been done through redeployment & natural attrition. I can only hope the AU dollar drops soon as this will be our only relief.
Sorry to here of your situation & hope you get a fair deal with your redundancy.
Jacko* is offline   Reply With Quote Multi-Quote with this Post
Old 20-02-2014, 09:50 AM   #54
XWGT
Powered by Marshall
 
XWGT's Avatar
 
Join Date: Jan 2005
Posts: 1,143
Default Re: Alcoa closes Point Hay

Thanks Chocko

Interestingly the decommission and repatriation may well be a 10 year operation.

Is it not feasible that those that currently run and maintain the plant would be the first in line for the contractor who wins the contract to dismantle and remove the plant?

I imagine the power station will also be dismantled. I understand its a second hand unit that dates back to the 50's and is possibly the most inefficient in the country. On that basis it would be hard to sell to anyone I would think. Again another opportunity for current employees with IP to be first in line?

Hope it all goes well
__________________
Powered by Marshall
XWGT is offline   Reply With Quote Multi-Quote with this Post
Old 20-02-2014, 01:44 PM   #55
Chocko
Regular Member
 
Chocko's Avatar
 
Join Date: Dec 2011
Location: Geelong, Victoria
Posts: 192
Default Re: Alcoa closes Point Hay

Thanks for the well wishes guys.

XWGT, it's still early days but we're talking with management about whether there could be some work for employees during the demolition/salvage phase but we don't have a clear picture on when that will actually happen.

I feel for the production guys, I've got a trade with a pile of post trade qualifications so I have that behind me but many of the production workers are basically unskilled (there are some with a trade qualification though) so it's going to be tough for them to find work particularly in the current economic climate.
__________________
My Build Thread
Chocko is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL