|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
|
|
Thread Tools | Display Modes |
28-05-2013, 08:07 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2008
Posts: 1,422
|
I noticed after fitting my new wheels, the rear right hand wheel seems to be nicely in line with the guard, whereas the rear left hand wheel sits in about another 7 or 8 mm. Both wheels are measured to the same spec offset-wise.
I noticed when putting on the centre caps, one side wouldn't go on, but the other went on fine. It's as if the threaded stub coming out the center of the hub is slightly longer. Anyone else seen this? My FG XR8 ute has the same problem, only it was about 13mm, so much worse. I appreciate any help. I'm thinking on just rectifying it with a 5mm spacer, but that's not the point. Cheers.
__________________
2011 SILHOUETTE FPV GS 315 #0275 20x10", 20x8.5" Lenso D1R's Pedders XA Coilovers Brembo 4/1 Pacemaker 1" 7/8 Headers Twin 3" Stainless Manta Catback XFT Built Motor XFT Custom Surge Tank XFT Stage 3 ZF Final Drive Chromoly Tailshaft KPM Twin Air Filter KPM Stage 2 Intercooler KPM Twin Throttle Body 2.6L Kenne Bell on E85 BlueStreak Circle D Converter 900+ rwhp thanks to Xtreme Ford Tuning |
||
|
|
Rear Wheels Not Lining Up
Threaded Mode