|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
|
|
21-08-2005, 06:31 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Posts: 664
|
hey guys, i am now the proud owner of a straight, low rust Mk 1 Zephyr.
Whatever happens to it, its going to get new paint, and eventually re-covered seats (seats are accapteble, but there are some cracks and a small tear starting on the drivers side of the front bench), a fresh engine, all new suspension bushes and brakes. Im after info on hotting them up slightly, what normally becomes the weak points when this is done, and general things to look out for. During the rebuild, it is likely to recieve a head job, a little more compression (somewhere above the stock 6.8:1), side-drafts, extractors, and if i can afford it, a mild cam. The aim of the project is to create something that someone back in the 60's would have made as a mild street/strip car (im after mid-high 16's, shouldnt be pushing my luck that much) so aside from weak points, things to watch out for, etc. can anyone give me any specs on them (performance would be nice)? all i know is 68 hp @ 4000rpm, with the hockey stick exhaust manifold and 27mm (single throat) downdraft carby |
||
|
|
|
21-08-2005, 08:23 PM
|
#2 | ||
|
buickman
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
|
A guy at work has got 2 mk1 Zephyrs & is going to build 1 out of the 2. His going to fit a 302 V8 windsor with a 9 inch. There are a few English streetrodder Mags with diffferent mods to the MK1 that I've seen.
Actully in the latest Ford Performance mag there is a pic of a Black MK1 in Qld doing 10 sec 1/4's . Speco thomas performance made parts for the Zephyr mtrs to go. buickman |
||
|
|
|
|
22-08-2005, 08:12 AM
|
#3 | ||
|
The one and only
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,053
|
My dad bought a MkI to restore.
Very straight and no rust, but needs interior done. The only thing I suggested he do is fit a EL motor and trans. Considering current fuel cost and the efficiancy of EFI. I don't think they have any weak point, these were made when car were supposed to last!
__________________
1992 DC LTDHO 360rwkw built by me Tuned by CVE Performance Going of the rails on a crazy train Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
Last edited by LTDHO; 22-08-2005 at 06:57 PM. Reason: MkI not MkII |
||
|
|
|
|
22-08-2005, 06:55 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Posts: 664
|
nah no engine conversions, if i have to modify the body the value will probably drop. ill just do up one of the spares, so if i blow up the engine, i still have the matching numbers block still in good nick, and its still the 'right' engine for the car.
25mpg standard isnt that bad anyway, and with those mods (aside from the cam) that can only get better |
||
|
|
|
|
20-01-2008, 06:21 PM
|
#5 | ||
|
Starter Motor
Join Date: Mar 2007
Posts: 25
|
Hi guys,
If you are looking for zephyr parts. A guy i work with has an extensive range of parts for all zephyrs...he has a MK iV himself. Here is his website and contact info and a list of some of his parts. http://users.mrbean.net.au/~purvis/ |
||
|
|
|
Mk 1 Zephyr
Hybrid Mode